Skip to content
Literary Yours
Menu

How to Measure Necklace Length: A Simple Step-by-Step Guide

Measure a necklace, size your own neck and choose a length that sits exactly where you want it, with a simple chart and fixes for common slips.

Two strands of gold beaded chain on white background

The short answer

To measure a necklace, unclasp it, lay it flat and straight on a table without pulling, and measure from the very tip of one end to the very tip of the other — clasp and jump ring included. That figure is the length.

To work out what length you need, run a non-stretchy piece of string around your neck exactly as the chain would sit, mark the point where the two ends meet at the front, then lay the string against a ruler. Compare the figure with the standard lengths below, or with a necklace you already own and wear often.

Always note the measurement in both centimetres and inches. Most UK listings show one or the other, and converting after the fact is where people order the wrong size.

What you need before you start

You need very little, but the right little things matter:

  • A soft dressmaking tape measure, or a piece of non-stretchy string, ribbon or cord plus a rigid ruler.
  • A necklace that already fits you well — the single most reliable reference point you have.
  • A mirror, so you can see where the chain actually lands rather than guessing from feel.
  • A helper if you're measuring someone else or measuring the back of your own neck.
  • The top or neckline you plan to wear it with, since fabric changes where a chain sits.
  • Pen and paper (or your phone) to write the number down before you forget it.

How to measure a necklace you already own

  1. Unclasp it and lay it flat

    Place the chain on a plain, flat surface such as a table. Straighten any kinks gently with your fingertips. Do not lift it by one end or let it hang, and do not pull it taut — a stretched chain always measures longer than it is.

  2. Measure from tip to tip

    Start at the outer tip of the clasp at one end and finish at the outer tip of the fastening at the other. Keep the tape flat against the chain and follow its line. Include the clasp, any jump ring and any tag.

  3. Note the extender chain separately

    If the necklace has an extender, measure the shortest it can be fastened and the longest, and record both figures. A chain listed as 45 cm with a 5 cm extender is really anything from 45 to 50 cm.

  4. Record the pendant drop as its own figure

    For a necklace with a pendant, measure the chain alone, then measure from the top of the bail to the bottom of the pendant. That drop hangs below the chain and changes where the piece sits on the body.

  5. Write both numbers down

    Record the chain length in centimetres and inches, plus the drop if there is one. Keep the note with the necklace or in your phone — it becomes your reference for every future purchase.

How to measure your own neck for a new necklace

  1. Put on the neckline you'll wear it with

    A chain that sits on bare skin at 45 cm may disappear under a roll neck at the same length. Measure over the collar, shirt or jumper you actually plan to wear it with, or measure against bare skin and accept that the same chain will sit differently over fabric.

  2. Decide where you want the lowest point to fall

    Base of the throat, just above the collarbone, on the collarbone, or a few centimetres below it. Be specific before you start — the whole measurement depends on this one decision.

  3. Wrap non-stretchy string around your neck

    Hold one end at the front of your neck where you want the chain to sit, take the string around the back of your neck and bring it to meet at the front. Keep it level and comfortable, not tight. Elastic, stretched cord or a tape that sags will all give you a false reading.

  4. Pinch or mark the meeting point

    Hold the join firmly between finger and thumb, or mark it with a pen or a knot, then take the string off.

  5. Measure the string flat

    Lay the string straight against a ruler or tape measure and read the distance between the two ends. That is your necklace length.

  6. Check the ease and look in a mirror

    You should be able to slide a finger comfortably under the string and the skin should not be marked when you take it off. Look in a mirror to confirm the position, then compare the figure with a chain you already own to sanity-check it.

Standard necklace lengths and where they sit

Collar
Around 30–33 cm (12–13 in). Sits at the base of the throat, close to the neck.
Choker
Around 35–41 cm (14–16 in). Sits just above the collarbone.
Princess
Around 43–48 cm (17–19 in). On or just below the collarbone; the most common everyday length.
Matinee
Around 50–61 cm (20–24 in). Below the collarbone, over the upper chest.
Opera
Around 71–86 cm (28–34 in). Mid-chest, and often long enough to double.
Rope or lariat
Around 90 cm (36 in) and longer. Drops below the bust and can be knotted or doubled.

These bands are conventions rather than rules, and makers do not follow them identically — one brand's 45 cm can sit noticeably higher than another's if the clasp is heavy or the chain is thick. Treat the chart as a starting point and trust your own measurement first.

Why the same length looks different on everyone

Two people wearing the same 45 cm chain can end up with very different results, and it is worth knowing why before you commit:

  • Neck circumference. A chain has to travel further around a larger neck before it reaches the front, so it hangs higher.
  • Chain weight and width. A fine, light chain sits closer to the skin; a heavier one stands away from it and can hang shorter at the front.
  • Pendant weight. A weighty pendant pulls the chain into a V, so the front dips lower and the back rides up.
  • Posture and shoulders. Sloping shoulders and a forward-leaning posture both change where the chain settles.
  • Where the clasp sits. A clasp with a bulky fastening tends to drift round to one side rather than staying at the nape, which makes a necklace look off-centre.

Matching necklace length to a neckline

General guidance only — try the chain against the actual garment before you commit.
NecklineLength to look forWhy it works
Crew and high round necks35–41 cm or 60 cm and overSits either above the fabric or well below it; a chain that lands exactly on the neckline tends to look accidental
V-necks45–50 cmFollows the line of the V and fills the open space, especially with a pendant that echoes the shape
Boat and slash necks35–45 cmSits on the collarbone above a wide horizontal neckline rather than competing with it
Strapless and sweetheart40–45 cmKeeps the décolletage open and puts the chain where it can be seen against bare skin
Turtlenecks and roll necks71–86 cmWorn over the knit so the chain lies on the fabric instead of vanishing underneath it
Open shirt collar50–61 cmSits between the collar points and reads as deliberate rather than lost

Measuring for someone else

Buying a necklace as a gift is where guessing goes wrong most often. The safest route is to borrow a chain they already wear regularly — from a jewellery box, a bedside table, a coat pocket — and measure it using the steps above, then buy something similar in length.

If you can't get hold of one, ask them to measure their own neck with string and report the number, framed as curiosity rather than a surprise. A third option is to note the length printed on the box or card of a piece they already own, if they still have it.

Failing all of that, choose a length with an extender so the wearer can adjust it, or lean towards a mid-range princess length, which suits the widest range of necklines and builds.

Common mistakes and how to fix them

  • Pulling the chain tight. The most frequent error by far. Lay it flat and simply remove the kinks; tension adds centimetres that don't exist.
  • Leaving out the clasp. Clasps, jump rings and tags all count. Measure tip to tip or your replacement will arrive short.
  • Forgetting the extender. Note both the shortest and longest fastening positions rather than one figure.
  • Measuring high on the neck. Chains rest at the base of the neck, not up by the throat. Measure where the chain will actually sit.
  • Using stretchy string or a sagging tape. Both under-read or over-read. Non-stretchy string against a rigid ruler is the reliable combination.
  • Ignoring the pendant drop. A long drop pushes a choker into princess territory; measure chain and drop as two figures.
  • Measuring over a bulky top and buying for bare skin. A roll neck can swallow several centimetres of chain. Decide which way you'll wear it and measure that way.
  • Rounding up. If your string measures 43.5 cm, work with 43.5 cm. Standard sizes vary enough between makers that vagueness costs you.

Necklace measuring questions

Where should a pendant actually sit?

Wherever you want it — but the most flexible position for everyday wear is on or just below the collarbone. Add the pendant's drop to the chain length when you picture it, because the pendant hangs lower than the chain itself.

Can I use a rigid ruler instead of a tape measure?

Yes. Lay the chain flat and measure it in straight sections, marking where each section ends so you don't lose your place. Add the sections together. Don't lift the chain off the table or straighten it under tension.

How do I measure an elastic or stretchy necklace?

Measure it relaxed and flat, not stretched, then allow for the give in the elastic when you judge the fit. Note that stretchy pieces loosen with wear, so a measurement taken when new is the tightest it will be.

What's the most commonly worn necklace length?

Princess length, roughly 43–48 cm (17–19 in), is the most widely worn everyday length because it sits on or just below the collarbone and works with most necklines. It's a sensible default when you have no other information.

Does chain thickness change the length I should order?

It can. A thick or heavy chain stands away from the neck and sits higher at the front than a fine chain of the same length, so if you're replacing a delicate chain with a chunky one, consider going up a size.